Publicité
EN
EN
8
Lubrication
Lubricating under the running belt will ensure superior performance and extend its life
expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, and
repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt.
Pour some lubricant under the centre of the running belt on the top surface of the running
deck.
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should
be wiped off.
Adjusting the running belt
1.
The running belt on the BluMill Walking Pad will shift slightly after continuous use. This is
normal for all treadmills.
2.
To straighten/adjust the running belt turn the adjusting bolt on either side of the base, see
figure C and D.
3.
Do not allow for the running belt to catch the sides of the BluMill Walking Pad as this will tear
the belt.
2024-05-28 BM Walking pad ManualV02.indd 8
2024-05-28 BM Walking pad ManualV02.indd 8
01-07-2024 14:56
01-07-2024 14:56
Publicité
