Publicité
before assembly. Once assembled, check that the connection hose is not exposed to any strain
in any of the hose coiler's positions.
I N S T R U C T I O N S F O R U S E :
•
The hose coiler has an integrated automatic coiling and locking system. Pull as much of the hose
as you require towards yourself and then allow it to self-retract while keeping a gentle hold on it
with your hand. The hose will now be retracted until the next locking point and stay uncoiled at
this length.
•
Pulling on the hose again will release the locking mechanism and cause the hose to be fully
retracted and coiled onto the coiler.
•
If the hose becomes twisted during work, it must be untwisted before the automatic coiling
system is activated again.
M A I N T E N A N C E :
•
Fully uncoil the hose and clean it. Do not use any corrosive cleaning agents such acetone, ethyl
alcohol, petrol, etc.
•
Release the pressure after use.
D I S P O S A L :
Separate the different materials (plastic / rubber / metal) to allow them to be recycled in line with
national standards. Do not mix old oil with other waste.
2 5 0 6 1 L
7
Publicité
