EN
1
Adjusting the gain level
The AM6160G5 has an adjustable gain
control. You can adjust the gain level
depending on your signal strength. Use
a flat-headed screwdriver to adjust the
gain.
2
Additional Features
Short circuit protection
For added safety the AM6160G5 has
built-in short circuit protection. Should a
short circuit be detected, the amplifier will
shut downin order to prevent any possible
damage. Should this occur, all outputs will
be switched off but the power LED will
remain lit.
TECHNICAL SPECIFICATIONS
Input
Output
Frequency Range
Max output level
Gain
Noise
Weight
Dimensions
1. Turn clockwise to increase the gain
level (max 18dB)
2. Turn anticlockwise to decrease the gain
level (min 0dB (no signal amplification))
To reset the system following a short
circuit, simply remove all outputs and
inputs, switch off the amplifier and
remove the power cable from its socket
for approx 30 seconds.
You should then reconnect the amplifier
outputs one by one until you can fi nd
which output is causing the short circuit.
1
2
47 - 694 MHz
94 dBµV
0-18 dB
3.5dB
330 gr
130 x 75 x 45 mm