Publicité
OPERATING INSTRUCTIONS
5. Remove the right side adjustable foot, remove
the bottom hinge from the bottom right side of
the refrigerator.
6. Unscrew the shaft from the bottom hinge and
screw it to the reverse side of the bottom hinge.
Remove the left side adjustable foot and screw.
Secure the bottom hinge to the bottom left side
of the refrigerator using the screws previously
removed. Assemble the bottom two adjustable
feet.
7. Remove the sleeves from the top right of the
doors and the hole cap from the top left of the
doors. Assemble them on the opposite sides.
8. Remove the door stopper and door self-
locking block from the right bottom side of the
refrigerator door and install the included left
door open stoppers and door self-locking blocks
from the accessory bag on the other side of the
door.
9. Remove the door stopper and door self-locking
block from the right bottom side of the freezer
door and install the included left door open
stoppers and door self-locking blocks from the
accessor bag on the other side of the freezer
door. Save these to resue if the door swing is
reversed at a later date.
10. Install the refrigerator door to the bottom hinge.
Remove the hole cover from the top left side of
the refrigerator door, install it to the top right
side of the door. Move the plastic bushing to the
reverse side of the middle hinge and assemble
the middle hinge. Use sticker provided in
accessory bag to cover hole.
11. Place the freezer door on the middle hinge
vertically, then take out the top hinge and cover
from the accessory bag. Assemble top hinge,
hinge cover and hole cover.
NOTE: The images above are for reference only.
The actual configuration will depend on the
physical product.
7
Publicité
