Publicité
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 mm.
*Reference
1
Turn the keeper nut clockwise using the
spanner.
To loosen the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise
with an 8 mm spanner.
Down
Up
16
Keeper nut
Adjustment hinge pin
3
Fasten the keeper nut by turning it
counterclockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
CAUTION
• When tilting the appliance backward to loosen
the screw at the bottom of the appliance, two
or more people should hold the handles at the
bottom and rear top side of the appliance.
Connecting the Water Line
(For Plumbed models Only)
Accessories
Water Filter
Tube Connector
EN
Water Tube
Clip
Publicité
