Publicité
2
Remove the screws and star washers (1) from
the bracket as shown above. Loosen (do not
remove) the screws (2) from the bracket as
shown above. Install mounting bracket to outlet
box in ceiling using the screws and washers
provided with the outlet box.
Remove screws from motor bracket and mounting plate. Hang fan from
mounting plate by inserting "T"-shaped end of bracket into slot opening of
mounting plate. This will allow for hands free wiring.
1
Bracket
2
Install ation & Ope rating In struct io ns for the
Parrot uncle Ow ner's Instal lation ,Ma nual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Install the remote control receiver mounting
plate to the bracket using two screws.
3
F6291QQ
2
3
Publicité
