Publicité
2. Kit comPonents
2.4 SC-7000 Signal Clamp
(included with AT-7030, option for AT-7020)
The clamp accessory is used for applications
when there is no access to the bare
JAW
conductors. The clamp attachment enables
the AT-7000-T Transmitter to induce a
signal through the insulation into either
energized or de-energized wires. The
signal will travel through the wire in both
HAND GUARD
directions and into all the branches. This
transmission method will not damage any
sensitive electronic equipment connected to
JAW TRIGGER
the circuit.
INPUT LEADS WITH
BANANA PLUG
2.5 BR-7000-T Signal Booster Rechargeable Battery Pack
(included with AT-7030, option for AT-7020)
The BR-7000-T Signal Booster Rechargeable Battery Pack
provides increased power to the AT-7000-T Transmitter,
enabling improved wire tracing results in energized, de-
energized and clamp modes. This 7.2V, 2.2 Ah Lithium-Ion
(Li-Ion) battery pack automatically begins recharging when
the transmitter is connected to circuits between 90V - 270V.
The outside of the battery features a LED status indicator that
shows the remaining battery charge with the push of a button.
10
Publicité
