Publicité
®
ALED WPLED 52W/ 80W BILEVEL INSTRUCTIONS
Thank you for buying RC lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-722-1000 or email: marketing@rclighting.ca
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
WARNING:
WIRING
1. Bi-level fixtures have LED's wired separate. The two sets are shown below.
2. Each LED has leads brought through the arm and labeled.
3. Use the wires for switching as needed in your application.
Easy Installation & Product Help
Tech Help Line
©2015 RC LIGHTING, LLC
Call our experts 888 722-1000
Northvale, New Jersey 07647 USA
ALED WPLED 52/80 BL IN 0515 RCL
®
Set #1
rclighting.ca
Visit our website for product info
Set #2
email
Answered promptly sales@rclighting.ca
.
Publicité
