Publicité
1.
Frequently monitor the charger and battery pack while connected
2.
Unplug the charger and disconnect it from the battery pack when finished.
3.
Allow the battery pack to cool completely before using it.
4.
Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down
to room temperature before charging. This will extend the life of your
batteries.
NOTE: Remove battery pack from charger stand which use your thumb or
fingers, press the battery's release button in and pull the battery pack off at
the same time.
7.2
Battery capacity indicator (Fig. 1a)
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you squeeze the button. Before using the machine, please press switch trigger to
check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
3 LED's are litt: Battery fully charged
2 LED's are litt: Battery 60% charged
1 LED is litt: Battery almost discharged
8 TECHNICAL DETAILS
Type
Voltage
Battery type
Battery capacity
Charger rating input
Charger rating output
Charging time
9 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
9.1
Battery pack
This product contains Li-ion. To preserve natural resources, please recycle or
dispose of batteries properly. Local, state or federal laws may prohibit disposal of
Li-ion batteries in ordinary trash. Consult you local waste authority for information
regarding available recycling and/or disposal options.
Copyright © 2024 VARO
POWDP90620
POWDP90620
12-20V
Li-ion
12-20V – 2000mAh
200-240V~50Hz/60Hz
21V, 2.0A
20 V – 2000mAh = 80 min
20 V – 3000mAh = 120 min
20 V – 4000mAh = 160 min
2x20V – 2500mAh (40V tool) –
5000mAh (20V tool) = 180 min
2x20V – 4000mAh (40V tool) –
8000mAh (20V tool) = 270 min
P a g e
| 6
EN
www.varo.com
Publicité
