BK626 / 51012
BEFORE USING: In order to start the watch, please remove the plastic stopper first, and
Battery: 1 x LR626 / SR626 / 377, 1.5V
To prolong the appearance of your watch, avoid conctact with the following :Perfumes, hairspray,
cosmetics, detergents, adhesives and paints as they cause discoloration, deterioration and damage.
To help prevent possible damage from perspiration, dust and moisture, periodically wipe your watch
with a soft dry cloth.
To ensure lasting durability please take note of the following points: Never attempt to open the
case of your watch. Batteries should be replaced by a qualified technician.
WARNING: You should not dispose of this device with your household waste.
A selective collection system for this type of product is implemented by your local authorities. Please
contact your local authorities to find out how and where collection takes place. These restrictions apply
because electrical and electronic devices contain dangerous substances that have harmful effects on
the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a
waste container crossed out with an X symbol.
Imported by EML – trading name Prodis, 1 rue de Rome, 93110 Rosny-sous-Bois, France -Made in PRC
Marketed by EUROtops Versand GmbH, Elisabeth-Selbert-Str.3, D-40764 LANGENFELD, Germany
INSTRUCTION MANUAL
then push the crown against the watch.
SETTING THE TIME AND THE DATE
Position 0: Normal running position
Position 1 : Setting of the date
Gently pull the crown to position 1 and turn it clockwise
to set the date.
Push the crown to position 0 to confirm and complete the setting.
To enable the change of the date the next day, the date must
be set between 5 am and 8 pm.
Position 2 : Setting of the time
Gently pull the crown to position 2 and then turn it in one
direction or the other to set the time.
Push the crown back into the position 0 to confirm and finish.
WARNING
1
English
1 ATM