Publicité
SAFETY INSTRUCTIONS
WARNING:
1. Read and understand the entire owners' manual before attempting
assembly or operation.
2. Read and understand the warnings in this manual. Failure to comply
with all of these warnings may cause serious injury.
3. This rolling mill is designed and intended for use by properly trained and
experienced personnel only. If you are not familiar with the proper and safe
operation of an rolling mill, do not use until proper training and knowledge
have been obtained.
4. Do not use this rolling mill for other than its intended use.
5. Always wear approved safety glasses/face shields while using this arbor
press. Everyday eyeglasses only have impact resistant lenses; they are
not safety glasses.
6. Do not operate this arbor press while tired or under the influence of
drugs, alcohol or any medication.
7. Check damaged parts. Before further use of the rolling mill, a part that
is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.
8. Provide for adequate space surrounding work area and non-glare,
overhead lighting.
9. Keep visitors a safe distance from the work area. Keep children away.
10.Use recommended accessories; improper accessories may be
hazardous.
11. Make sure the work piece is securely attached or clamped to the table.
- 2 -
Publicité
