Publicité
5
Insert the receiver into the moun�ng bracket with the flat side of the receiver facing the ceiling.
Install the motor cover to the moun�ng bracket with 4 screws.
6 6
One blade at a �me,Install blade to the blade bracket with screws and washers provided. Tighten screws securely.
Repeat for the remaining 4 blades.
One blade bracket at a �me,install the blade bracket with blade to the motor with screws provided. Tighten screws securely.
7
Install 3 X E12 MAX.25 wa� bulbs(not included).
Remove 3 screws from the light kit, and then connect 2 sets of connectors.
Install the light kit to the motor with 3 screws.
8
R
F
NOTE: Wait for the fan to stop before reversing the direc�on of the blade rota�on.
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Instale 12 bolas de cristal en el kit de luz.
The silde switch(XX) controls the direc�on of the blades:
forward(switch down) or reverse(switch up).
The appropriate speed se�ngs for warm or cool weather depends
on factors such as the room size,ceiling height, and number of fans.
(SUMMER TIME)
-(Forward) A downward airflow creates a cooling effect.
This allows you to set your air condi�oner on a higher se�ng without affec�ng your comfort.
(WINTER TIME)
-(Reverse) A upward airflow moves warm air off the ceiling.
This allows you to set hea�ng unit on a lower se�ng without affec�ng your comfort.
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
X12
F6349Q110V
Publicité
