Publicité
1
Remove 2 screws from the mounting bracket.
2
3
Install the bracket of motor to the mounting bracket with 4 screws. Tighten screws securely.
4
FROM POWER SOURCE
AC 110- 120 VOLT 60Hz
3.5AMPS.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
Make the wire connection between the Fan and power supply.Make sure all connections are secured.
Warning:Failure to disconnect power supply prior to installation may result in serious injury.
For safety and best operating results,recommend you have a qualified electrician install this fan.
Secure mounting bracket to outlet box by tightening mounting screws & washers.
The ceiling fan must be installed in a location with a minimum of 300mm spacing from the tip of
the blade to the nearest objects or walls.Secure the mounting bracket to the ceiling joist or
structure that is capable of carrying a load of at least 15.9kgs,with two long screws provided.
Ensure at least 30mm of the screws is threaded into the support.
Mounting screws
Note:For ease of wiring feed house wires through mounting bracket.
Use plastic wire nuts
supplied with the
fan
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Remove 4 screws from the bracket of motor.
Remove 10 screws from the motor.
Ground wire
Blue
Use plastic wire nuts
supplied with the
F6349Q110V
fan
Publicité
