Publicité
The Advanced Battery Chargers are designed for use with all types of 12V batteries.
Compatible with WET, AGM, EFB, VRLA as well as 12.8V LiFePO4 Lithium batteries. The
chargers are not intended to charge any other batteries other than those mentioned
above and up to a maximum of 300Ah (STG15). Charging other types of cells other than
those mentioned above may cause explosions, injuries or damage to property. The
charging process is controlled by a microprocessor which ensures the correct
charging of the battery and automatically switches into a maintenance mode once
the battery is fully charged. In this mode this battery will be maintained and will not be
overcharged or damaged.
Power Supply
In this mode the charger will supply power as a 12V power supply (up to 13.7V). It can
also be used as a float charge mode to maintain and keep larger capacity batteries at
100% charge in normal conditions without time or voltage limitations.
Recondition
Using a pulse charging program to break up sulfate this mode restores batteries into
good condition.
Test
This mode allows users to Test the Battery of a vehicle as well as Testing the Alternator.
TECHNICAL SPECIFICATIONS
Model
Input Voltage
Rated Power
Input (MAX)
Rated output
voltage
Rated output
current
EN
INTRODUCTION
FEATURES
STG5
110-240 VAC,
50/60Hz
72W
DC12V
5A
STG10
230 VAC, 50Hz
145W
10A
4
STG15
220W
DC12V/24V
15A/7.5A
Publicité
