Publicité
REMOTE CONTROL
1. Power Switch
Switch to turn the device ON or OFF.
2. Mode Switch
Press to change modes.
3. Rec
Press this button short to start recording
Press this button for a second time to play recording
Press this button for the third time to exit recording function
4. PLAYBACK RECORDING
5. Master Volume Up
Press to raise volume.
6. Previous Track
Press to choose previous track.
7. Play / Pause
Press to start/resume or pause play.
8. Next Track
Press to choose next track.
9. Master Volume Down
Press to decrease volume.
10. EQ
11. Numpad
12. Repeat
Press to select repeat single track or repeat full folder.
BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the "MODE" button and activate the BT-function.
3. Select "Fenton" on your BT device and pair.
Attention: BT distance is approx. 10meter without any barrier.
BUILT-IN STEREO PAIRING FUNCTION
1. Power on the first
Partybox500
2. Power on the second
Partybox500
3. These two speakers, long press the PAUSE/PLAY TWS button, will see TWS-ON in the led display.
4. Play Audio from BT device. The audio sound will be transmitted through both speakers.
MICROPHONE PRIORITY
MIC priority button: long press this button to enable or disable microphone priority; the music is automatically turned down when
you speak through the microphone.
speaker and connect it to a BT device.
speaker and set the mode to BT (Do not pair any devices).
6
Publicité
