Publicité
VASNER
Usage of StandLine Mini
•
Plug in the device.
•
Turn the thermostat switch to level 1. At level 1, the StandLine Mini runs at
half power at approx. 750 W.
•
The rotary range from level 1 to MAX designates the range that is controlled
by the integrated thermostat.
•
Turn the rotary knob until the StandLine Mini jumps to the maximum level
at 1500 watt. The point at which the heater switches upwards is the ther-
mostat point of your current room temperature.
•
If you leave the rotary knob here, the room temperature will be maintained
using 1500 watt. If the room continues to heat up, the StandLine Mini auto-
matically switches to half power at approx. 750 W.
•
If you would like to heat the room even further, you can turn the rotary
knob clockwise up to MAX to set the thermostat's switch-off point to a
higher temperature.
Caution:
At level 1 and 2, the device NEVER turns off completely. Even when
operating using the thermostat function. A minimum of 750 watt is always
used to heat the room.
OFF
Function knob
+ Thermostat
switch
20
15
GB
Level 1
750 W
Level 2
1500 W
+
Thermostat
up to MAX
Publicité
