Publicité
Component parts
Mounting the StandLine Mini 15
•
First of all, please place the power cable between both plates of the base
•
Then plug together the two base plates with an accurate fit. The cable leads
now through the base plate through the center hole
•
Now position the StandLine on the base plate and fix it from the bottom
with the two ring washers and screws
•
Lead the power cable between the slots and recesses and fix it with the
cable fixture and the two small screws
•
The VASNER StandLine Mini is now ready to use.
GB
VASNER
1. DEVICE BODY
2. REAR FIXED FOOT
3. FRONT FIXED FOOT
4. PLASTIC HANDLE
5. CR-NI-GRILL
6. LED INDICATION AND
FUNCTION BUTTON
7. INFRARED-HEATING-PIPE
19
Publicité
