Publicité
ASSEMBLY
List of parts
Castors • Chair base • Pneumatic lift • 6 screws M6x35 mm • 3 screws M8x20 mm
• 3 spring washers M8 • Seat with mechanism • Armrests • Headrest (only for HD
version) • Backrest with connector • Allen keys for screws M6 and M8
1.
4.
1.
Push the castors into the base of the chair.
2.
Insert the air jack into the hole of the chair base.
3.
Using an Allen key, screw the armrests onto the seat (M6x35 mm screws)
4.
Using an Allen key, screw the backrest to the mechanism using three
M8x20 mm screws and theree M8 washers.
5.
Place the seat on the lift cone. Tighten the tapered connection
by loading the seat once.
6.
Slide the headrest into the screwed-in holder. (only in HD version)
2.
5.
3.
6.
VERSION
HD
EN
EN
1
Publicité
