Publicité
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble.
Press GEQ repeatedly
to select the equalization
mode.
The GEQ mode is displayed cyclically as follows.
ROCK—
POP—
CLASSIC—
GEQ OFF
(cancel)
The selected equalization mode is displayed.
To cancel the selected mode
Press GEQ repeatedly until "GEQ OFF is displayed.
* MULTI JOG is also available to change the equalization
mode
Using the headphones
Connect headphones to PHONES jack with a standard stereo
plug (06.3 mm,
1/4
inch).
No sound is output from the speakers whilethe headphones are
plugged in.
When the headphones are plugged in, the DSP SURROUND
system, the DOLBY PRO LOGIC and the 5.ICH (page 20) do
not function.
The DSP (Digital Signal Processor) SURROUND system can
create the effect of sound reflected from walls and ceilings. This
system enhances 3 types of sound presence.
DISCO: Sound presence of a disco
LIVE: Sound presence of a live music performance
HALL: Sound presence of a concerl hall
DSP —
(DISCO,
LIVE,
HALL)
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DISCO or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the selected DSP SURROUND mode button again. "DSP
OFF is displayed.
While
the DW
SURROUND mode is off, no sound is heard from
the surround speakers.
To select with the remote control
Press SURROUND
repeatedly
until the desired
mode is
displayed.
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote
control. "S-L"or "S-R" is displayed for 2 seconds. Press ++
or
>
on the remote control within these 2 seconds.
The DOLBY PRO LOGIC (page 15) and the DOLBY DIGITAL
SURROUND
(page 20) surround
speakers
level is also
changed.
The DSP SURROUND mode is canceled when:
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
- the 5.1 CH (page 20) is selected.
Sound adjustment
during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the recording.
7
ENGLISH
Publicité
