Publicité
4. You can change the temperature by using the number
keys. And you also can change the cooking time by
touching TIME and then touching number keys.
Start/Enter
5. Touch
to confirm.
The appliance starts preheating.
The set temperature is reached once the preheat bar has
filled up completely and a beep sounds.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. Close the appliance door and
then touch Start/Enter to resume operation.
Sensor cooking
You can select two sensor cooking modes. Sensor
cooking allows you to cook many of your favorite foods
without selecting cooking times and power levels. The
microwave oven automatically determines the required
cooking time for each food item.
For best results for cooking by sensor, follow these
recommendations:
Food cooked with the sensor system should start from
normal storage temperature.
Turntable tray, ceramic tray and outside of container
should be dry.
Foods should always be covered loosely with
microwavable plastic wrap, wax paper or lid.
Do not open the door or touch Clear/Off key during
sensing time. When sensing time is over, the oven
beeps once and the remaining cooking time will
appear in the display. At this time you can open the
door to stir, turn or rearrange the food.
Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it
in the oven following package directions.
Touch Pizza.
1.
Touch Pizza repeatedly until "MICROWAVE PIZZA"
2.
is displayed.
Touch
Start/Enter.
3.
When sensing is complete, a beep will sound and the
4.
calculated cook time will start to count down.
Note: Do not open the door during the sensing
process, or the program will be cancelled.
Once the calculated cook time is displayed, you can
open the door to stir, turn or rearrange the food. Touch
Start/Enter to resume operation.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. Close the appliance door and
then touch Start/Enter to resume operation.
Sensor Reheat
The Sensor Reheat feature lets you reheat dinner plates
or casseroles (8-16 oz.) for your cooking convenience.
Setting Sensor Reheat
Touch Sensor Reheat.
1.
Touch Start/Enter.
2.
sensing is displayed. The microwave operates during
sensing.
When sensing is complete, a beep will sound and the
3.
calculated cook time will start to count down.
Note: Do not open the door during the sensing
process, or the program will be cancelled.
Once the calculated cook time is displayed, you can
open the door to stir, turn or rearrange the food. Touch
Start/Enter to resume operation.
When sensor reheat is finished, a beep will sound.
Notes
Cover with vented plastic wrap or wax paper.
Reheat food on a microwaveable dinner plate.
EN-17
The appliance starts sensing.
Publicité
