Publicité
Your device at a glance
Note: The actual appearance of your
device may differ from the illustrations.
► P. 3, fig. 1
1. Support
2. Frame
3. Notch lever
What is included
• Frame
• Support
• Instructions for use
Installation
► P. 3, fig. 2
– Fold the notch lever (3) up.
– Insert the support (1) into the frame (2).
– Bend the safety clip (4) inward.
Operation
WARNING! Danger of injury! Keep chil-
dren and other unauthorised persons
away from the work area! Keep your
hands and feet away from any moving
parts! Otherwise, there is a risk of sustain-
ing serious injuries!
Prior to using the car jack, make sure all the parts of
the car jack and support trestle are present and fully
functional.
– Make sure the surface under the support trestles
is level and sufficiently strong.
– Slide the support trestles under the vehicle at the
designated position.
– Adjust the support (1) to the necessary height.
– Lower the load carefully until it rests on the sup-
port trestles.
– Remove the car jack.
WARNING! Danger of injury! Exceed-
ing the maximum capacity may result in
life-threatening injuries!
Storage and transport
Storing
NOTICE! Risk of device damage! Do
not store the device in damp areas with-
out protection.
– Store the device where it is dry and well venti-
lated.
Transport
– If shipping, use the original packaging wherever
possible.
Disposal
Disposal of the appliance
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Item number
Minimum height
Maximum height
Weight
Max. capacity
Static coefficient
GB
351018
268 mm
418 mm
4,8 kg
2000 kg
150%
11
Publicité
