Publicité
Installation Instructions
1. UNPACK AIR CONDITIONER
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
• Remove packaging materials. Save the carton and
the foam packaging for storing the air conditioner
when not in use.
NOTE: There are NO packing materials inside the air
conditioner to remove—Do Not open the cabinet.
• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not
set the air conditioner on its side, front, back or
upside down.
INSTALL WINDOW PANELS
3.
A. Measure the window opening.
opening, use just the middle panel of the
Window Kit with the opening for the Exhaust
Hose Adapter. For openings from 20" to 26",
insert the smallest side panel into the middle
panel. For openings from 26" to 32", insert the
next smallest side panel into the middle panel.
For openings from 32" to 37" insert the largest
side panel into the middle panel. For openings
larger than 37" insert the largest panel on one
side of the middle panel, and another of the
smaller panels on the other side.
Cam lock
B. Place the Window Kit into the window opening
fill the opening. Lock the panels in place with
the Cam Locks. Slide the window shut against
the Window Kit.
49-5001072 Rev. 0
2. Install Exhaust Hose Assembly
to Back of Unit
hose counterclockwise into the exhaust port on the
back of the Air Conditioner.
For a 20"
11
Publicité
