Publicité
How To Operate Your Vehicle
(8) How to use the remote controller:
(2) Brake button: Press it to stop moving; press it again to move.
(3) Speed selection key and speed indication: used to select speed of the car. Press the key once to switch the
speed once. 3 speeds are cyclically switched, and the switching sequence is: low-medium-high The speed
indicator is arranged from top to bottom on the remote control: high-speed lamp, medium-speed lamp,
low-speed lamp; when switching to one speed, the corresponding indicator lamp will light up. Note: The speed
grade changes only when moving forward
(4) Forward/backward keys: used for forward and backward movement control. When one of the keys is
pressed, the moving speed will slowly increase to reach the set speed level. Therefore children will not have a
sudden impact.
(5) Left turn/right turn key: used for left and right direction control.
(6) Knob switch: control pure manual and remote control mode.When the arrow in the middle of the remote
control knob points to"REMOTE".it indicates the remote control status and cannot be manually operated. At this
time, the three indicator lights are constantly on/When the arrow in the middle of the remote control knob points
to "Manual", it indicates manual status and cannot be remotely controlled. At this time, the three indicator lights
flash.
Note: without operation after 10 seconds, indication light will off into power saving mode.
Warning: The remote control is not a toy. It is for the adult use only, and should not be used
by a child. A close adult supervision is always required. Reception range may change
significantly with weather, battery, and other environmental conditions.
Publicité
