Publicité
Installation (continued)
2
Securing the faucet assembly
□
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). Push the FastMount™ system (B)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Push
Sink
1
1
up
B
B
Push
2
B
up
3
Screw
B
Fig 1
3
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
1
2
Sink
Sink
5
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.CA
Publicité
