Télécharger Imprimer la page

Basilico M687 Mode D'emploi page 2

Publicité

Features and Controls:
Mode Button:
The button starts from Dry mode; this is the normal vacuum seal state.
Press the mode button to change to 'Gentle Mode'.
Press again to go to 'Moist Mode'.
Vacuum Seal: Press Vac Seal button to vacuum, seal and shut ff automatically. To start Vacuum Seal again,
please wait for more than 30 seconds.
Single seal: press seal button to seal the bag, to start Vacuum Seal again, please wait for more than 30 seconds.
Stop: Press this button to stop all the operations.
Inhale Hole: Use the vacuum hose to vacuum the canister or container.
Canister Button: Press this button to start and finish the external vacuum function automatically in working
condition, press this button to stop external vacuum.
NTC Intelligent temperature control: When the temperature of the heating strip exceeds the pre-set safety
temperature, the machine will enter the safety protection mode automatically, the indicator flashes, the button
operation will be invalid.
When the temperature of the heating strip is reduced to a safe degree (about 2 minutes later), the indicator
stops flashing, and the machine automatically returns to normal operating state.
How to vacuum seal or seal the bag:
Insert the power cord connector into the AC power interface of the machine and turn on the power.
Please make sure the open end of embossed vacuum bags is clean and without wrinkles.
insert the open end of the vacuum bag into the bag clip to fix it. (Fig. 1)
Press both sides of the cover, a "click" sounds means it is fastened.! Fig. 2)
Switch the "Dry/Gentle/Moist" button to suitable mode; select Dry mode for vacuuming dry food, select
Gentle mode for vacuuming fragile & powdered food, select Moist mode for vacuuming wet food. (Fig. 3)
Press Vac Seal button, the device will vacuum, seal and shut off automatically. Press Seal button, the
device will start seal and shut off automatically. If you need to stop halfway, press the stop button. (Fig. 4)
When the sealing process is completed, press release button (fastener) at both sides, open the cover,
remove the bag well packed.
Note: A textured (embossed) bag or a corner folded bag is required for vacuuming, while ordinary bags
can only be sealed.

Publicité

loading

Ce manuel est également adapté pour:

626210