Publicité
Delivery set
• Wall Kit for air extraction with external metal hood
ø125 Article code 344754
• Wall Kit for air extraction with external metal hood
ø150 Article code 344755
Name
External metal hood with backdraft
damper
Telescopic duct
Plastic plate with a backdraft damper
and connection to round ducts on both
sides
Mounting tape, 5 m
Screw 3x25 PZ
Dowel 5x25 N
Screw 4x45 А2 PZ2
Dowel 8x40 N
• Wall Kit for air extraction with external grille ø125
Article code 367362
• Wall Kit for air extraction with external grille ø150
Article code 367363
Name
External grille
Telescopic duct
Plastic plate with a backdraft damper
and connection to round ducts on both
sides
Mounting tape, 5 m
Screw 3x25 PZ
Dowel 5x25 N
Drawings
► Variants – p. 3
1. Wall Kit for air extraction with external metal hood
ø125
• Article code 344754
2. Wall Kit for air extraction with external metal hood
ø150
• Article code 344755
3. Wall Kit for air extraction with external grille ø125
• Article code 367362
4. Wall Kit for air extraction with external grille ø150
• Article code 367363
Mounting
► Assembly – p. 3
• Wall Kit for air extraction with external metal ø125.
Article code 344754.
• Wall Kit for air extraction with external metal hood
ø150. Article code 344755.
1. Prepare a round core hole in the outer wall.
2. Fix the external hood to the duct with mounting
tape. Insert the air duct in the wall.
3. For ease of installation use the mounting wedges
(not included in the delivery set). Install the air
duct with the minimum slope of 3 mm down
towards the street. Fill the cavity around the chan-
nel with mounting foam.
• Wall Kit for air extraction with external grille ø125
Article code 367362
• Wall Kit for air extraction with external grille ø150
Article code 367363
1. Prepare a round core hole in the outer wall.
2. Fix the external grille to the duct with mounting
Number
tape. Insert the air duct in the wall.
1 pc.
3. For ease of installation use the mounting wedges
(not included in the delivery set). Install the air
1 pc.
duct with the minimum slope of 3 mm down
towards the street. Fill the cavity around the chan-
1 pc.
nel with mounting foam.
► P. 3, fig. 1
1 pc.
– Figure illustrating the slope to ensure condensa-
tion drain
4 pc.
4 pc.
4 pc.
4 pc.
Number
1 pc.
1 pc.
1 pc.
1 pc.
8 pc.
8 pc.
GB
11
Publicité
