Publicité
Energy saving function
– Press ECO symbol [ ] on display panel enter
into ECO mode, the unit will run 10 min for high
setting (2000W) and run 30 min for low setting
(800W) alternately under the setting temperature.
If ambient temperature is higher than setting one,
the unit will stop to heat.
Screen lock setting
– Press power button [ ] for 5 seconds will acti-
vate the lock function, during the lock, the button
on control panel will not be available. Press power
button for 5 seconds again will close lock function.
Cleaning
DANGER! Risk of injury! Before all work
on the device, always disconnect the mains
plug.
Fault/malfunction
Device does not heat
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Preparing for disposal
NOTICE! Environmental pollution! The
device is filled with a particular quantity of
special oil. Repairs which require the open-
ing of the oil tank may only be carried out by
the manufacturer or its customer service
partner.
Follow guidelines with respect to disposal of
the oil and scrapping of the device.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
Technical data
Part number
Number of heating ribs
Nominal voltage
Nominal output
Heat levels
Protection class
Dimensions
Cause
Is the device switched off?
Is the temperature regulator set too
low?
No mains voltage?
377408
9
230 V~, 50 Hz
2000 W
800 W
1200 W
2000 W
I
43 × 27,5 × 64 cm
– Switch off the device and let it cool off completely.
– Pull out the plug.
– Wipe the device with a slightly damp cloth.
Faults and remedial measures
When something isn't working...
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedial measure
Switch on the device or set the de-
sired heat level.
Set the temperature regulator high-
er.
Check cables, plugs, outlets and
fuse.
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
GB
19
Publicité
