Télécharger Imprimer la page

Kids Embrace Group 2,3 Car Seat Mode D'emploi page 9

Publicité

All manuals and user guides at all-guides.com
Installation in vehicle (continued)
MAKE sure the lap section of
the vehicle belt rests as low as
possible over the child's hips and
that the diagonal section of the
vehicle belt is positioned over the
center of the child's shoulder (B).
If the child's eyes are above the
vehicle's seat back (if no headrest
exists) or the top of the vehicle
headrest, then the child is too
large to use this child seat.
! ENSURE that the vehicle buckle
does not interfere with the armrest
or side of the booster seat. If it
does, move the child seat to
another vehicle seating position.
! DO NOT route the vehicle belt
using any other path when using
this child seat.
! ONLY install this child seat on
forward-facing vehicle seats.
If the diagonal section of the vehicle belt is resting against your child's
neck use the belt clip to curve it over the child's shoulder giving a more
secure fit.
Note: The belt clip is permanently attached to the underside of the
booster seat and should not be removed. When not using the clip; wrap
the strap around the clip and tuck it under the booster seat fabric.
A
B
Diagram showing
correct use of belt clip
7

Publicité

loading