Publicité
BEFORE THE FIRST USE
Carefully remove all contents from packaging and inspect the product for damage.
CHARGING
Connect the USB cable. Plug the charger into the source. During charging the indicator
will light red. When the device is fully charged, the indicator light will be off. The first
charge should be 4 hours. Then use with 2-3 hours of charge will be enough.
ASSEMBLY
Assemble the appliance as per the instructions.
1
USE
Press the on/off button to start pumping water from the bottle.
Press the button again to stop pumping water.
When there is no water in the bottle, please do not use the product to
avoid damage and power consumption.
CAUTION: The silicone hose must not come to the edges in the bottle.
Water ingress should not be prevented.
CAUTION: Do not remove the carboy top cover. The device will enter
when you press it. If necessary, open the small snap ring (the part for
the water dispenser) with a pointed tool.
CLEANING AND MAINTENANCE
• Do not immerse the main body in water.
• Always unplug the device from the charger before cleaning or maintenance.
• Wash the microfibre cloth in warm soapy water and let it dry properly.
• To clean the exterior of the device, wipe it with a soft damp cloth and then let it dry
properly.
• Clean the stainless steel water outlet pipe in warm soapy water and let it dry.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but
must be offered at a central point for the recycling of electric and electronic domestic
appliances. This symbol on the appliance, instruction manual and packaging puts your
attention to this important issue. The materials used in this appliance can be recycled.
By recycling of used domestic appliances you contribute an important push to the protection of
our environment. Ask your local authorities for information regarding the point of recollection.
2
KWP-8511 User Manual
3
3
4
Publicité
