Publicité
3.
3. Then make the bearing frame fall to a
horizontal position.
4.
4. If you need to fold, also hold the middle
buckle of the bearing frame and lift it to the
highest position.
5.
5. After lifting to the highest position, press the
left and right buttons inward to unlock.
6.
6. Then press down on the bearing frame to
fold. After folding, use the hook to fix it.
This operation is specially designed to prevent
accidental touch unlocking.
10
Bearing plate
STEPS
Insert the bearing plate C from the front to the top of
FOUR
the bearing frame. Note that the side with the Velcro
is facing down. 4 Velcro are bound to the bearing
frame to prevent slipping. (If you need to fold, untie
the Velcro and remove the bearing plate, press the
button in the middle of the bearing frame to fold.)
STEPS
FIVE
The side storage box
can be hung on the
right side of the
changing table as
shown in the picture.
And the divisional
design is good for
placing different kinds
of supplies.
The front wash basin can be outward in the direction shown in the
picture, and align the slots on both sides with the cross pipe, then
press it into position to store water.
11
Publicité
