Storage; Disposal; Troubleshooting Guide - Timberpro M 2600-3 Mode D'emploi

9. Storage

Aged fuel is one of major causes of engine starting fail-
ure. Before storing the unit, empty the fuel tank and run
the engine until it uses all the fuel left in the fuel line and
the carburetor. Store the unit indoor taking necessary
measures for rust prevention.

11. Troubleshooting guide

Case 1. Starting failure
CHECK
fuel tank
fuel filter
carburetor adjustment screw
sparking (no spark)
spark plug
Case 2. Engine starts but does not keep running/hard re-starting
CHECK
fuel tank
carburetor adjustment screw
muffler, cylinder (exhaust port) → carbon is built-up
air cleaner
cylinder fin, fan cover
PROBABLE CAUSES
→ incorrect fuel
→ fuel filter is clogged
→ out of normal range
→ spark plug is fouled/wet
→ plug gap is incorrect
→ disconnected
PROBABLE CAUSES
→ incorrect fuel or staled fuel → drain it and use correct fuel
→ out of normal range
→ clogged with dust
→ clogged with dust
GB 27

10. Disposal

When disposing your machine, fuel or oil for the machine,
be sure to allow your local regulations.
ACTION
→ drain it and use correct fuel
→ clean
→ adjust to normal range
→ clean/dry
→ correct (GAP: 0.6 ~ 0.7 mm)
→ retighten
ACTION
→ adjust to normal range
→ wipe away
→ wash
→ clean