Publicité
(1) Network
Network is used to toggle between the dynamic and static IP addressing.
DHCP: When enabled, the IP address of the Matrix is assigned
automatically by the DHCP server connected.
Static: When enabled, set up the IP address manually.
Apply: Click to enable the network setting.
The default setting is DHCP.
Note:
When "Static" is selected, please ensure your PC is in the same network
segment as the Matrix, i.e. the IP address of your PC should be set as
192.168.xxx.xxx (x is suggested among 2 to 253).
Please wait for about 30s for the Matrix's LAN module to reboot and
reconnect after the network setting is changed.
(2) Login Password
This section allows you to change login password.
The default password is "admin".
Apply: Click to save the changes.
Note: The new password must be 4 to 16 characters in length (alphanumeric
only).
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
17
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Publicité
