Publicité
9. Put the door back on. Make sure the door is aligned both horizontally and vertically so that the
seals will work properly on the unit before fixing the top hinge bracket.
10. Place the top hinge bracket onto the screw holes on the lefthand side. Insert the screws and
tighten with an adjustable wrench.
11. Put the hinge cover back onto the top hinge bracket. If you have not already done so, also put
the screw hole cover back onto the right side of the door.
12. Detach the door seal (using a putty knife if required to prise it off), rotate 180 degrees and
reattach it.
13. If necessary, adjust the adjustable feet to make the freezer level.
9
Publicité
