Publicité
INSTRUCTIONS :
1) Remove the water tank, open the lid, fill the tank with clean water,
then close the lid tightly.
Note: Only cold water can be refilled. Do not use hot water.
To prolong the life of Steam Up, distilled or demineralized water is preferred.
(Fig. 7)
2) Place the water tank in its original position after filling it with water.
(Fig. 8)
3) Connect the power supply to AC 220V-240V. (Fig. 9)
4) Turn on the steamer by turning the knob to the desired power
depending on the type of garment you want.
4 powers are possible:
1- disinfection;
2- Polyester or chemical fiber;
3- Cotton linen or light clothing;
4- Other type: thick clothes. (Fig.10)
sav@robby.fr
p.18
Publicité
