Publicité
Attach the Rear Wheels
2WD
4
3
8
Remove all the parts from the rear axle.
1. Cut off the the cable ties on the both gear boxes of the vehicle body with scissors. Insert the
rear axle
into the hole in the gear box, the hole in vehicle body and out through the hole in the
gear box on the other side.
2. Slide a rear wheel onto the rear axle, and ensure the gear on the rear wheel match up with
gear box on the body.
3. Slide a Ø12 washer onto the rear axle.
4. Tigthen a lock nut to the end of the rear axle with a socket wrench.
5-7. Repeat the above steps for the other rear wheel.
HINT: An extra spanner has been provided to hold the Lock nut on the other side of the rear axle
while tightening the lock nut on the other side.
8. Snap a hubcap into each wheel.
2
9
6
1 1
5
6 7 8
Publicité
