Publicité
CAUTION:
Turn the power off before replacing ink roller.
DISPLAY SYMBOL
MEMORY
ERROR
GT
TAX+, TAX-, TAX%
SELL,COST, MARGIN%
: A number has been stored in Memory
: Error or overflow of capacity
: The display value is negative
: A number has been stored in Grand Total
: Performance of tax calculation
: Performance of cost, sell, and profit margin calculation
DATE AND TIME FUNCTION
The TIME key is used to display the Time or Date. Depressing the
TIME key once displays the date MM-DD-YYYY. Depressing the
DATE key a second time displays the time, HH-MM-SS.
When displaying the Date or Time the = key becomes a key to
enter or exit the date or time set mode.
12/24
When displaying the Time the -e key becomes a key to toggle be¬
tween the 12 (AM/PM) or 24 hour clock mode.
AM/PM
H
When displaying the Time in the set mode the x key becomes a key
to toggle between AM and PM when in the 12 hour time mode.
Set Date and Time
1) Press TIME and then SET (The first digit of the month will flash)
2) Enter the month MM using the number keys. (The first digit of the date will flash)
3) Enter the date DD using the number keys. (The first digit of the year will flash)
4) Enter the year YYYY using the number keys. (The first digit of the month will flash)
5) Press SET to confirm the date.
6) Press TIME and then SET. Enter the time using the number keys and press
12/24 to switch between 12-hour or 24-hour clock.
7) Press AM/PM to toggle morning or afternoon and press SET to confirm the
time.
E4
Problem
Operation
Read-out
Printing-Out
How to set date:
Oct. 29, 2001
|TIME|
SET
f=1
(Hold 3 seconds)
10
29
2001
SET
[3
MM-DD-YYYY
"M"M-DD-YYYY
10-"D"D-YYYY
10-29-"2"YYY
"1 "0-29-2001
10-29-2001
How to set time:
a)
3:45AM
b)
3:45PM
c)
15:45
|C/CE|
|TIME| fflMEl
SET
[=] (Hold 3 seconds)
0345
SET
H
SET
[=] (Hold 3 seconds)
AM/PM
SET
m
m
12/24
a
AM
HH-MM-SS
AM
"H"H-MM
A'"
"0"3-45
AM
03-45-00
AW
"0"3-45
pm
03-45-00
15-45-00
DATE FORMAT:
While displaying the date, depressing the % key allows chang¬
ing the date format mode from MM-DD-YYYY to DD-MM-YYYY
or YYYY-MM-DD. The default date format is MM-DD-YYYY.
NOTE:
If the power cord is disconnected from the AC power source,
the date/time memory will be lost and need re-set.
RESET:
Electromagnetic interference or electrostatic discharge may
cause the display to malfunction or the contents of the memory
to be lost or altered. Should this occur, use the tip of a ball
point pen (or similar sharp object) to press the [RESET] but¬
ton on the back of the calculator. After resetting, be sure to
set the tax rate , time and date again.
E5
Publicité
