Publicité
EN
14
OPERATION
1. Slip your legs into the leg cuffs and let your legs lie flat on the floor. Note
that the leg cuffs are marked L (left leg) and R (right leg).
2. Use the foot strap to secure your foot firmly in the massager.
3. Use the leg strap to fix your leg firmly in the massager.
4. Move your foot to make sure the massager is securely attached.
5. Plug the two compressed air connections into the control unit.
6. Attach the power supply unit to the leg massager and insert the plug into
the mains socket.
7. Press the POWER button on the remote control to turn on the device.
8. Then press the POWER button briefly several times to set one of the
following intensity levels: LOW-MEDIUM-HIGH.
9. Then press the MODE button to set the desired mode.
10. Then press HEAT button to set the desired heating level.
Note: The appliance switches off automatically after 20 minutes. Do not
use the leg massager for more than one hour.
Publicité
