Publicité
HOW TO USE
Plug the car OR wall adapter into
an electrical outlet. The adapter
plug and product cable should
"snap" together when properly
connected in place.
Use the pull-over sleeve to soften the heat and massage intensity.
POWER ON/OFF:
One quick press of the power button turns on the massager
unit. When you first turn on your massager the heat feature is auto-
matically turned on and the auto rotation switching feature is activat-
ed, changing direction every 60 seconds.
TURN HEAT ON/OFF: Press the Power button to turn the heat
off, then again to turn it on. Press again to cycle through the heat's on/
off settings.
TO TURN OFF: Press and hold the power button for 3-5 sec-
onds, and the unit will completely shut off.
LOCATION OF PARTS AND CONTROLS
FRONT
Power
Massage Nodes
Button
Product
Leather
Cover
BACK
Chair/Headrest Strap
Cable
9
TROUBLE SHOOTING
Issue
Probable Cause
You hear a
When the product is in oper-
mechanical sound
ation the massage heads will
when product is
make a mechanical sound.
in use
Overheating Protection
activated
The power adapter is not
Cannot turn on the
properly plugged into the
power
electrical socket
Product cable is not proper-
ly connected to the power
adapter
Grinding/clicking
noises from the
Product is malfunctioning
massage head
If you are experiencing a problem with your ZMA-13 Shiatsu
Massager, please contact Zyllion, Inc. at 1.855.588.8168.
Zyllion, Inc. reserves the right to interpret any printing errors and omissions
at its own discretion.
Any product updates or design details are subject to change without pri-
or notice.
Solution
Normal Sound.
Let unit sit for 30 minutes
to cool off and then restart
Plug the electrical cord
securely into the electrical
socket
Make sure the product ca-
ble and the power adapter
have clicked together
Contact Zyllion
Customer Service.
10
Publicité
