Publicité
A
ACCESSORIES
1x TWS earbuds, 1x Charging cable,1 User manual
USAGE
Turn on:
Just take the two earbuds out of the charging cradle. They will
turn on automatically. Once the earbuds have powered up, you
should hear a sound indicating that they have automatically
connected with one another.
Turn off:
There are two ways to turn off the earbuds. Once the earbuds
have powered down, you will hear a sound indicating that they
are off. The RED indicating light will flash three times quickly.
Method 1: Put the earbuds into the charging cradle. The
earbuds will turn off and go into charging mode automatically.
Method 2: You can press and hold the control buttons on the
earbuds for three seconds to turn them off.
Note: If you turn off only one of the earbuds, the other one will
remain connected with the mobile device and carry on working.
Earbud pairing
The earbuds will pair with one another automatically when
they are turned on. One of the earbuds will become the master
earbud. The master earbud's LED indicating light will flash
RED and BLUE alternately. The other earbud will not display a
light.
Bluetooth connection with mobile device
While the earbuds are paired with one another, open the
Bluetooth settings on your mobile phone, iPad or other
Bluetooth-enabled device, search 'TWS 19150" and click on
it to connect. When the earbuds connect with your device
successfully via Bluetooth, you will hear 'CONNECTED' and
the LED indicating lights on the earbuds will turn off. You
can then play music on your device and enjoy it through the
earbuds.
Publicité
