Publicité
USING DRILLING TEMPLATE TO MOUNT HOST ENCLOSURE TO FLOOR (CONTINUED)
3. Position the host enclosure over the anchor holes or on your anchors.
4. Tighten all floor anchors and check plumb.
NOTE:
• The AXS frame and host enclosure must be made plumb in two directions. Therefore, shimming the
host enclosure, if required, must be done prior to bolting the host enclosure to the floor.
• The floor mounting hardware is provided by the installer and approved by the field engineer who rates
the entire job.
WARRANTY
For warranty information, refer to http://www.middleatlantic.com/company/about-us.aspx#warranty
Corporate Headquarters
Voice: 973-839-1011 - Fax: 973-839-1976 - International Voice: +1 973-839-8821 -
Fax: +1 973-839-4982 - www.middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice: 613-836-2501 - Fax: 613-836-2690 - ca.middleatlantic.com -
customerservicecanada@middleatlantic.ca
Middle Atlantic EMEA Technical Support
Voice: +31 (0) 495 726002 - av.emea.middleatlantic.support@legrand.com
Factory Distribution
United States: New Jersey, California, Illinois - Canada: Ontario - The Netherlands: Weert
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
Page 6
Publicité
