Publicité
SUPPLIED COMPONENTS AND HARDWARE (CONTINUED)
Extended View With Pre-Installed Components Labeled
AXS Frame
Service Stand
(TRACKL, Sold Separately)
USING DRILLING TEMPLATE TO MOUNT HOST ENCLOSURE TO FLOOR
NOTE: For instructions on mounting your host enclosure to the floor
using the seismic mounting kit, refer to the "AXS In Rack Seismic
Mounting Kit Instruction Sheet" (I-00878) at www.middleatlantic.com.
1. Position the floor drilling template provided in your desured
location noting 'F' for front. (FIGURE A)
2. Use a hammer drill to carefully drill holes for your floor anchors
(not provided).
NOTE: This must be executed with precision. Do not allow the
hammer drill to "walk" the bit. The template is provided to ensure
exact anchor locations.
(TRACK50, Sold Separately)
NOTE: Service Stands (TRACKL) and Service Tracks (TRACK50)
are sold separately. For more information, refer to the "TRACKL
Service Stand Instruction Sheet" (I-1002) at www.middleatlantic.com.
Page 5
Host Enclosure
Cable Carriers
Service Tracks
Holes to drill for
floor anchors
(not provided).
FIGURE A
Publicité
