Télécharger Imprimer la page

Haier Google Serie Mode D'emploi page 5

Publicité

PREPARATION
IMPORTANT:
Do not apply pressure to the screen display
area which may compromise the integrity of the display.
The manuafacturer's warranty does not cover user abuse
or improper installations.
ATTACHING THE STAND
The stand of the TV must be assembled
IMPORTANT:
prior to usage.
1.
Place the TV unit face down on a soft and flat surface
(blanket, foam, cloth, etc.) to prevent any damage to
the TV.
2.
Fix the stand to the base with four screws.
For reminder, the base is heavy, please hold it with
hand carefully.
Screws:M6 x 35mm x 4pcs
PREPARING YOUR TV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches
(60 mm) from the wall to prevent cable interference.
Before mounting your TV on the wall, you need to
remove the stand.
For your safety, please use only with a UL listed wall
mount bracket with minimum weight of the TV without
stand.
To attach a wall mount bracket to your TV:
1.
Remove the screws holding your TV to the stand.
Remove the stand from your TV. For reminder, the
2.
base is heavy, please hold it with hands carefully.
3.
Secure the wall mount bracket to the back of your
TV using
screws. Follow the instructions of the
user manual that came with the wall mount bracket
to install.
NOTE
The wall mount bracket are not included.
Fix the wall mount screws (M8x16mm/6pcs) into
4.
the rear side of the TV, using the torque of
10kgf·cm.
TURNNING ON THE TV
Install the stand and place the TV on a solid surface.
1.
NOTE
Ensure that the TV is placed in a position to allow free
flow of air. Do not cover the ventilation openings on the
back cover.
To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed on or in the
vicinity.
Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or
splashing.
2.
Connect the antenna cable or cable TV cable to the
ANT IN aerial socket on the back of the TV set.
3.
Power:
Plug the cord into a working power outlet.
Turn the TV on:
4.
Press
on the remote control or
the side control pannel of the TV.
4
Min
1m
button on
POWER

Publicité

loading

Ce manuel est également adapté pour:

H98s900ux