Publicité
Channel
select
buttons
(4) Channel Selection V CHA
The
channel
number
is displayed
on
the
screen when the Channel
selector Up (A)
button or Down
(V) button is pressed on
the set or on the remote control. When the
Channel (A) button is pressed, the channel
number will change as follows: 1.2.3...38.
39.1.2... Each time the Channel { V ) button
is pressed, the channel number will change
as follows:
39.38.37...,
2.1.39.38
Channel selector buttons on the remote con-
trol can also be pressed to directly select the
desired channel. If the factory pre-set chan-
nel frequencies
do not
match
your
local
channel frequencies, refer to Presetting the
Channels.
(Behind the door)
'Q
MODE
SKIP
(ON SCREEN)
FINE
PRESET
Memory TV
Band indicator
Station
ENE)
Channel Number
2 Mati
\"CHA.
U
pen
000
Channel
select
buttons
(5)-(a) Presetting the Channels
Note:
Most channels are preset at the factory. To avoid
unnecessary resetting, check the tuning of all
channels beforehand.
1. Press the Preset button behind the door
and select the band, VL. VH, or U, that
you wish to programme. Press the button
once for the VL and VH positions. Press
again for the U position. Then press once
more when you have finished programming
the channel. (VL: VHF low band, VH: VHF
high band, U; UHF band)
. Select the channel number (1 — 39) you
wish to store with the Channel selector (A)
button or (\') button on the set or on the
remote control.
Publicité
