Samsung DV45H7400E Serie Manuel D'utilisation page 18

installing your dryer
DRYER EXHAUST TIPS
Plastic or non-metal fl exible duct presents a potential fi re hazard.
WARNING
1. Make sure your dryer is installed properly so it exhausts air
easily.
2. Use 4" diameter rigid metal duct. Tape all joints, including at
the dryer.
Never use lint-trapping screws.
3. Keep ducts as straight as possible.
4. Clean all old ducts before installing your new dryer.
Be sure the vent fl ap opens and closes freely.
Inspect and clean the exhaust system annually.
Don't let a poor exhaust system slow drying by:
1. Restricting your dryer with a poor exhaust system.
2. Using a plastic, thin foil, or non-metal fl exible duct.
3. Using unnecessarily long ducts that have many
elbows.
4. Using crushed or clogged venting or ducts.
DV7000H_DC68-03170J-13_EN.indd Sec3:18 DV7000H_DC68-03170J-13_EN.indd Sec3:18
1
3
English - 18
Wall
Dryer
DUCT
EXHAUST
TAPE
DUCT
2
4
3/27/2019 3:03:00 PM 3/27/2019 3:03:00 PM