Publicité
BEFORE INSTALLATION
Do not plug the power cord in until installation is complete.
Please contact our service center at 847.458.2334 for alternate
fittings or assistance with this process.
1. Turn Off Water
Turn off the water shut-off
valve. Drain the toilet tank
completely by flushing the
toilet. Unscrew the hose
connected to the toilet tank.
You may want to have a towel
ready to catch any residual water.
2. Remove Toilet Seat
Remove the mounting bolts to
release the existing toilet
seat from the toilet.
10
3. Install Catch Plate
Insert the rubber anchors into the toilet mounting holes. Align the installation
guide to the toilet rim and place the catch plate over the mounting holes. Assemble
the bolt guides by placing the metal inserts into the plastic brackets. Make sure to
insert them correctly so the metal inserts sit flush on top. Place the bolt guides on
the catch plate above the toilet mounting holes. Insert the bolts through the bolt
guides, catch plate, and rubber anchors. Use a Phillips screwdriver to secure the
catch plate on the toilet.
Existing
Toilet Hose
4. Install Your BB-500
Slide the bidet seat all the way onto
the catch plate until you hear a click.
Press and hold the reset
button for 2 seconds
before continuing installation.
Bolts
Metal Inserts
Plastic Brackets
Catch Plate
Rubber Anchors
Catch
Plate Guide
Nuts can be used instead of Rubber Anchors to secure
from the underside of the toilet.
Be sure
the rubber
anchors
are fully
flush with
the toilet
mounting
holes.
11
Publicité
