Publicité
ASSEMBLY INSTRUCTIONS
10. Hook the chain from top flush valve flapper into the
furthest hole from the lever. With the lever at rest, the
chain should only be long enough for flapper to close.
11. Place the seat on the toilet, aligning the holes of the seat
with the holes in the back of the toilet bowl.
Secure nut from the bottom of toilet, use a regular
screwdriver to tighten to fit.
CAUTION: DO NOT OVERTIGHTEN THE SCREW AS IT
MAY CAUSE DAMAGE ON SEAT.
Hardware Used
KK
Toilet Seat
MM
Seat Hardware
12. Push the decorative cap down.
10
11
x 1
x 2
12
9
Publicité
