Publicité
PRODUCT DESCRIPTION
4
2
1
3
Unpack the unit contents. Remove any stickers that can prevent its operation. Check the unit for
damages. Do not use it in case of dam ages.
1. Assemble the base by carefully turning the unit upside down. Insert the cord between the front and
rear base and fasten by using the four screws provided.
2. Gently guide the cord by using the plastic plate and two screws provided. Tighten the screws securely
but do not over tighten.
3. Turn the fan upright. It is now ready for use.
1. Plug the power supply cord into an electrical outlet. The unit will 'beep' to indicate that unit is in
Standby mode. The LED temperature display will display the room temperature.
FAN SPEED
Press the 1-2-3 button to control the fan speed (Low, Medium or High). Press the OFF button to turn Fan
OFF.
OSCILLATION
Press the Osc button to turn Oscillation ON/OFF.
TIMER
Manually turn the dial to adjust the fan timer. (0-120 minute)
ASSEMBLY INSTRUCTIONS
1 Control Panel
2. Front panel
3. Base
4. Built-In Handle
ASSEMBLY
OPERATION
-4-
Publicité
