Publicité
MN010576A01-AA
Chapter 7: Call Alert Operation
Chapter 7
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call you back.
7.1
Making Call Alert
Your dealer can set up the One Touch Access button to send Call Alert to the desired subscriber ID.
Procedure:
1. Select the channel that you want to send the call alert.
2. Press the programmed One Touch Access button.
Result:
If the call alert is successful:
●
A positive tone sounds when the target radio is detected on the current channel.
If the call alert is unsuccessful:
●
A negative tone sounds.
7.2
Responding to Call Alerts
When you receive a Call Alert, the following radio indications occur:
●
A repetitive tone sounds.
Procedure:
To respond, press the PTT button.
24
Publicité
