R.G.V. AUSONIA 190 Manuel D'utilisation page 21

Instruction for use
C
To ensure safe operation:
• Before each use, verify the mechanical integrity of the device and
of all its components.
The device body and all components must not show cracks or tears.
The protective sheath and the plug of the power cord should not
be cracked or broken.
Upon the occurrence of the above, disconnect the plug from the
wall socket and take the unit to the dealer for the necessary checks.
Before plugging the appliance, ensure that the line voltage
corresponds to that indicated on the rating plate (see page 67).
• The electrical safety of the device is ensured only if connected to
an efficient earthing system in accordance with current safety
standards.
To verify this important requirement you need the help of a pro-
fessionally qualified personnel.
The manufacturer can not be held responsible for damage caused
by lack of earthing.
• For your safety, it is recommended to supply power through a
differential switch (RCD) with a tripping current not exceeding
30 mA.
• Do not obstruct the cooling during operation.
• Never immerse the appliance, the power cord and plug in water
or other liquids.
• Do not disconnect the electrical appliance by
pulling the power cord.
• Do not use or store this appliance outdoors, in a
wet environment or near water.
• Place the appliance on a horizontal supporting
and firm plane whose surface is not sensitive (eg,
lacquered furniture, tablecloths, etc..). Items such
as caps, jars etc.. shall be placed on the apparatus.
EN
OK!!
NO!!
21