SAFETY INFORMATION (continued)
• The pot must not be so large that it covers the cartridge
cover during use.
• Never heat an empty pot or pan.
• Do not let food boil over.
• The gas cooker is not suitable for ceramic pots.
• Do not store the gas cooker with the cartridge inserted and remove the
cartridge after each use and whenever you want to clean or check the
integrity of the appliance.
• After use, when the appliance has cooled down, use a soft cloth and some soapy
water to clean the housing and remove grease deposits. The burner head can be
cleaned carefully with a stiff brush.
• We recommend servicing the injection nozzle once a year. If it becomes clogged,
the appliance must not be used any longer and the nozzle must be replaced by an
authorised person. In this case, contact the customer service.
For the optionally available cartridge:
• Only 227g butane gas cartridges (according to EN 417) may be used. The use of
other cartridges can lead to serious injuries and damage. Remove any transport
protection materials before inserting the cartridge.
• Always follow all safety instructions and the instructions for use of the respective
butane gas cartridge.
• Never fill empty butane gas cartridges yourself.
• Keep children and animals away from butane gas containers.
• Make sure that the butane gas container is undamaged before using it.
• Make sure that the seal of the appliance and the cartridge are in good condition.
Do not use the appliance if any seal is worn or damaged.
The automatic safety shutdown:
• When used in a very hot environment, the internal pressure in the cartridge can
rise above 500kPa (normal is 200 - 300kPa). This activates the automatic safety
shut-off in the unit.
• In this case, turn the gas volume control knob to „OFF" and remove the cartridge
as described under „Use".
• Turn the gas flow control knob to the left until you hear the click to allow the re-
maining gas to escape from the appliance.
• Let the cartridge cool down.
• Reinsert the cartridge as described.
If the problem occurs repeatedly or the cause is not clear, stop using the unit and
contact customer service.